Installing it properly, Leveling it – Whirlpool ETZOTK User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

B E F O R E U S I N G Y O U R R E F R I G E R A T O R

Installing it properly

1. Allow

inch (1.25 cm) space on each

side and at the top of the refrigerator for
ease of installation.

2. If the hinge side of the refrigerator is to be

against a wall, you might want to leave
extra space so the door can be opened
wider.

3. The refrigerator can be flush against the

back wall.

i

a

Leveling it

Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below.

1. Remove base grille. (See page 13.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock­

wise.

4. Check with level.
5. Replace base grille. (See page 13.)

Right to raise;

Advertising
This manual is related to the following products: