Removing the drop-in door trim pieces, On some models) – Whirlpool ETZOTK User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
U S I N G Y O U R R E F R I G E R A T O R
Removing the drop-in door trim pieces
(on some models)
To remove the trim piece:
1. Remove all Herns from the shelf.
2. Pull straight up on the trim piece at each
end.
To replace the trim piece:
1. Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until it
stops.
3. Replace items on the shelf.
To replace the trim piece:
1. Line up ends of the trim piece wrth the
button on the door liner wall.
2. Push trim piece straight back until it
snaps securely into place.
3. Replace items on the shelf.
Advertising