Adjusting the crisper humidity control, Removing the meat drawer and cover, Adjusting the meat drawer temperature – Whirlpool 6ED25DQ User Manual

Page 10: Using your refrigerator

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING YOUR REFRIGERATOR

Adjusting the crisper humidity control

You can control the amount of humidity in the
moisture-sealed crisper.
• The control can be adjusted to any setting

between LOW and HIGH.

• LOW (open) lets moist air out of the crisper for

best storage of fruits and vegetables with skins.

• HIGH (closed) keeps moist air in the crisper for

best storage of fresh, leafy vegetables.

Removing the meat drawer and cover

To remove the meat drawer;

1. Slide the meat drawer straight out to the stop.

2. Lift the front slightly.
3. Slide out the rest of the way.

4. Replace in reverse order.

To remove the cover:

1. Remove meat drawer and crisper.
2. Lift front of cover off supports.

3. Lift cover out by pulling up and out.

To replace the cover:

1. Fit back of cover into notch supports on walls

of refrigerator.

2. Lower front into place.

3. Replace meat drawer and crisper.

Pull out to the stop, lift the

front and pull again.

Adjusting the meat drawer temperature

Cold air flows against the meat drawer through
an opening between the freezer and the refrig­
erator. This helps keep the meat drawer colder
than the rest of the refrigerator for better storage
of meats.

Slide the control to let more or less cold air

through.

Use control to

Advertising
This manual is related to the following products: