Whirlpool RB262PXA - Manual (Page 8)

USING YOUR OVEN
The electronic clock/oven control
Display/clock
• When you first plug in the range, the last
time of day set will flash on the display. If,
after you set the clock (page 9), the display
again shows the last time of day set, your
electricity was off for a while. Reset the
clock.
• When you are not using the oven, this is
an accurate clock.
• When using the oven or Minute Timer,
the display will show the time, temperature
settings and what command pads have
been pressed.
• When showing the time of day, the
display will show hours and minutes.
• When using the Minute Timer, the
display will show minutes and seconds in
the following sequence:
- For settings from 0-1 minute 55
seconds, the display will increase in
5-second increments and count down
each second.
- For settings from 2-10 minutes, the
display will increase in 10-second
increments and count down each
second.
- For settings from 10-60 minutes, the
display will increase in 1-minute incre­
ments and count down each second.
- For settings from 1-2 hours, the
display will increase in 5-minute
increments and count down each
minute.
- For settings from 2 hours-9 hours
50 minutes, the display will increase
in 10-minute increments and count
down each minute.
- When using Cook Time and/or Stop
Time, the display will show hours and
minutes.
Command pads
The command pads tell the oven what to do
and in what order. A few examples:
-Ciock/Set tells the oven you are going to
set the clock.
-Off/Clear tells the oven to turn off.
Each command pad (except Off/Clear) has
its own indicator. The indicator comes on
when you touch the command pad.
Set knob
Once you've pushed a command pad to tell
the oven what you want it to do, you’ll use
the Set Knob to set a temperature or time.
Turning the Set Knob clockwise increases
the number on the display. Turning the Set
Knob counterclockwise decreases the
number on the display.