Whirlpool BES750W - Manual (Page 14)

Before You Call For Service
If you are having an operating problem,
check the chart to see what the cause
might be before you call for assistance.
OPERATING PROBLEM CHECK IF WHAT TO DO
Nothing operates. ■ Oven is properly connected to a live
circuit with the proper voltage.
■ Contact an authorized Roper™
service technician to reconnect
oven to electrical supply. (See
Installation Instructions.)
• Fuse has blown or circuit breaker
has tripped.
■ Replace fuse or reset circuit
breaker.
■ Oven Temperature Control is
turned to a temperature setting.
■ Turn Oven Temperature Control to
the desired temperature setting.
If the Self-Cleaning cycle will
not operate. ■ The clock shows the right time of
day.
■ Reset clock, if necessary.
■ The Lock Lever is all the way to the
right.
■ You have set a delay start time.
■ Slide Lock Lever all the way to the
right, if necessary.
Cooking results aren't
what you expected. ■ Pans are the size called for in the
recipe.
■ Use correct-size pans.
■ You are following a tested recipe
from a reliable source.
■ Modify recipe or find a new recipe.
■ When baking, you have preheated
the oven as the recipe calls for.
■ Preheat the oven according to
recipe’s specifications.
■ When baking, you have allowed
1 1/2 to 2 inches (4-5 cm) on all
sides of the pans for air circulation.
■ Reposition pans for best air
circulation.
■ When broiling, you have not
completely closed the oven door.
■ Open oven door to the Broil Stop
position.
Page 14