Cleaning the interior components, Warning – Whirlpool EC510 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the interior
components
A
warning
Electrical Shock and
Product Damage Hazard
• Do not operate ice maker with lower
access panel or control panel removed.
Electrical shock or personal injury could
result.
• Do not wash plastic parts in dishwasher.
They cannot withstand temperatures
above 145°F(63°C).
1. Turn the Cycle Control Knob to “OFF” and
disconnect the electrical power supply to the
machine. Open the storage bin door and
remove any ice that is in the bin.
2. Remove ice retainer baffle by flexing it and
then slide it off the studs.
3. Remove the ice cutter grid by unscrewing the
two thumb screws, sliding the grid fonward and
unplugging the electrical wire harness.
i i
ii
4. Remove the water pan by unscrewing and
removing the two thumb screws and washers.
?
y
f'
I
5. Remove the hose from the water pump.
Ft
|. i
i i
1 1