Changing the lower access panel, Changing the iower access panel, Warning – Whirlpool EC510 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Screws
4. Carefully slide the panel ouf. You will find the
reverse side is white. For units with white
panels showing, the reverse side will be black.
5. Choose the color you want to show and
carefully slide the panel back into the door.
NOTE: Be careful not to scratch the panel as it
is inserted.
6. Replace the handle insert and tighten the
screws in both side trim pieces. Replace the
handle and the screws.
NOTE: You can make a decorative wood front
to match existing cabinets. The panel should
be '/
4
" (6 mm) thick and 17" x 11 V
4
"
(433 mm x 286 mm). Remove the color panel
and break off the ribs on the door insulation to
allow for wood thickness.
Changing the lower access
panel
A
warning
Electrical Shock Hazard
Do not operate ice maker with iower access
panei or control panel removed. Electrical
shock or personal injury could result.
1. Remove the two screws in the bottom grille area.
2. Remove the two screws from the top panel trim
and remove the top trim.
*4^
K'.
■ i-
r
I
i
i-'’'
I''”
i' ..