Cannon 50cm Free Standing Electric Cooker Coniston - Manual (Page 26)

26
Electronic timer (only for C50EC...)
End cooking
time setting
Clock
time setting
Selector
button
Cooking
time setting
Count down
time setting
To set
the clock Note: This may be set while the oven is switched off or while it is switched on.
1. Press the button several times until the icon and the first two numerical digits on the display
start to flash.
2. Use the “+” and “-” buttons to adjust the hour value.
3. Press the button again so that the other two numerical digits on the display begin to flash.
4. Use the “+” and “-” buttons to adjust the minute value.
5. Press the button again to confirm.
Note: If none of the buttons are pressed, the settings will be confirmed automatically after 10 seconds
have passed.
Manual
Mode The programmer after the Power up and the Clock time setting will be in ‘Manual Mode’ and shall be
possible to engage the other programmer functions using the selector.
The oven will be driven directly by the user by means of the knobs present on the control panel.
To set the
timer countdown Note: This function does not interrupt cooking and does not affect the oven; it is simply used to
activate the buzzer when the set amount of time has elapsed.
1. Press the button several times until the icon and the first two numerical digits on the display
start to flash.
2. Follow steps 2 to 5 “to set the clock” as detailed above.
The countdown will then be displayed; at the end of this period of time the buzzer will sound (this may
be stopped by pressing any of the buttons, or it will stop of its own accord after one minute).
Programming the
duration cooking Note: A cooking mode must be selected before programming can take place.
1. Press the button several times until the icon and the first digit on the display flash.
2. Follow steps 2 to 5 “to set the clock” as detailed above.
•
For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The programme
will stop automatically at 10:15 a.m.
Programming
delayed cooking Note: A cooking duration must be selected before delayed programming can take place.
1. Follow istruction “programming the duration cooking” as detailed above.
2. Then press the button until the icon and the two digits on the display flash.
3. Follow steps 2 to 5 “to set the clock” as detailed above.
•
For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed and the end
time is set to 12:30. The programme will start automatically at 11:15 a.m.
Programming has been set when the and icons are illuminated. The TIME display shows the
cooking end time and the cooking duration alternately.
To cancel a
previous setting Press button “-” up until 0 • 00.