Canon LV-7255 - Manual (Page 37)

28
ᕧ Turning off the Projector
To turn off the projector:
3. Projecting an Image (Basic Operation)
WARNING
POWER
AUTO PC
INPUT
LAMP
POWER
BACK
INPUT IMAGE
ASPECT
INFO.
MENU
NO SHOW
AUTO PC
1. Press the POWER button on the projector cabinet or
the remote control. The “Power Off / OK?” message
will appear.
CAUTION
Do not unplug the power cord from the wall outlet or do not turn off
the main power under any one of the following circumstances. Doing
so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the cooling fans are running. (The cooling fans continue to
work for 30 seconds after the projector is turned off)
• While the lamp is lighted.
ᕨ After Use
Preparation: Make sure that the projector is turned off.
1. Unplug the power cord.
2. Disconnect any other cables.
3. Retract adjustable tilt feet if extended.
NOTE: If the spacer is removed from the rear foot before use, attach it again.
4. Cover the lens with the lens cap.
5. Put the projector and its accessories in the supplied soft case.
2. Press the OK button or press the POWER button
again.
The POWER indicator will glow orange. After the
projector turns off, the cooling fans keep operating
for 30 seconds (Cooling-off time).
Immediately after turning on the projector and
displaying an image, you cannot turn off the projector
for 60 seconds.
3. Turn off the Main Power switch. The power indicator
will go out.
WARNING
LAMP LAMP LAMP
POWER
WARNING WARNING
POWER POWER
Power On Fan running Standby
Steady green
light
Blinking
orange light
Steady orange
light