Compaq 2800 User Manual
Page 106
Advertising
5–28
Maintenance and Service Guide
Removal and Replacement Procedures
6. Disconnect the drive activity light and battery power light
cable from the system board 1 (Figure 5-22).
7. Release the ZIF connector 2 to which the TouchPad cable is
connected and disconnect the TouchPad cable 3 from the
system board.
8. Disconnect the speaker cable 4 from the system board.
Figure 5-22. Disconnecting the Drive Activity Light/Battery
Power Light, TouchPad, and Speaker Cables
268135-002.book Page 28 Thursday, October 24, 2002 4:10 PM
Advertising