Compaq 2800 - Manual (Page 26)

Troubleshooting
Maintenance and Service Guide 2–5
Selecting from the Advanced Menu
Table 2-3
Advanced Menu
Select To Do This
Language (or press F2 ) Change the Computer Setup language.
Boot Options Enable/Disable:
■ QuickBoot, which starts the computer more
quickly by eliminating some startup tests.
(If you suspect a memory failure and want
to test memory automatically during startup,
disable QuickBoot.)
■ MultiBoot, which sets a startup sequence
that can include most bootable devices and
media in the system.
Device Options ■ Enable/disable the embedded numeric
keypad at startup.
■ Enable/disable multiple standard pointing
devices at startup. (To set the computer to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
■ Enable/disable USB legacy support for a
USB keyboard. (When USB legacy support
is enabled, the keyboard works even when a
Windows operating system is not loaded.)
■ Set an optional external monitor or overhead
projector connected to a video card in a
docking base as the primary device. (When
the computer display is set as secondary,
the computer must be shut down before
undocking from a docking base.)
268135-002.book Page 5 Thursday, October 24, 2002 4:10 PM