Before you call for service – GE CVM1790SSSS User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before you call for service^

©

Troubleshooting Tips

Save time and money! Review the charts on the following
pages first and you may not need to call for service.

Problem

Possible Causes

What To Do

Oven will not start

A fuse in your home may be

blown or the circuit breaker

tripped.

Replace fuse or reset circuit breaker.

Power surge.

Unplug the microwave oven, then plug it back in.

Plug not fully inserted into wall
outlet.

Make sure the 3-prong plug on the oven is fully inserted

into wall outlet.

Door not securely closed.

• Open the door and close securely.

Control panel lighted,

yet oven will not start

Door not securely closed.

Open the door and close securely.

START/PAUSE button not pressed
after entering cooking selection.

Press START/PAUSE.

Another selection entered
already in oven and CLEAR/OFF

button not pressed to cancel it.

Press

CLEAR/OEE.

Cooking time not entered after
pressing TIME COOK.

Make sure you have entered cooking time after pressing

TiMECOOK.

CLEAR/OFF was pressed
accidentally.

Reset cooking program and press

START/PAUSE.

Food weight not entered after
selecting AUTO DEFROST or
FAST DEFROST.

Make sure you have entered food weight after selecting

AUTO DEEROSTor EASTDEEROST.

Food type not entered after
pressing AUTO COOK.

Make sure you have entered a food type.

CONTROL LOCKED
appears on display

The control has been locked.

Press and hold

CLEAR/OEEfor

about 3 seconds

to unlock the control.

OVEN TOO HOTEOR

SENSOR COOKiNG—

USiNG ALTERNATE
METHOD appears
on display

One of the sensor cooking
buttons was pressed when the
temperature inside the oven
was greater than 200°F.

These features will not operate when the oven is hot.

The oven will automatically change to cook by time
(follow the directions in the display) or once the oven is

cool enough, the sensor features will function normally.

Eloorofthe oven is warm
even when the oven has
not been used

1

The cooktop light is located • This is normal,

below the oven floor. When
light is on, the heat it produces
may make the oven floor get warm.

You hear an unusual
low-tone beep

You have tried to change
the power level when it is

not allowed.

Many of the oven's features are preset and

cannot be changed.

Oven emits a smoky odoi
and gray smoke alter
using the Bake feature

■ Oils on the stainless steel cavity

are burning off after using the
Bake feature the first few times.

This is normal.

30

Advertising