GE WWP1180F User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1

Make sure hose coupler is tightened securely to faucet

2. Make sure intake hoses are tightened securely to machine.
3= Make sure drain hose is fastened securely.

Washer
coinplet© cycle

1. Make sure ild is closed. Washer will not progress through spin cycle with lid
up. Lid wiii be automaticaliy locked during spin portion as a safety measure.

Washer won't spin 1. Make sure ild is closed. Washer wiii not spin with lid up.

Cfotiiss ara abrior=
malty wet after spin

1. Load may have been excessively out of balance. Redistribute clothes and

rerun through final spin.

Washer is noisy

Washer won’t start

'water does not enter
or enters slowly ^ ■

Water temperatore
is incorrect

V/asher pauses
In cycle

1, The metallic “clicks” you hear during operation are norm.a! as the timer
advances.

^

2= Uneven floor. Make sure washer is level and firm to floor on Model
\A/WP1180F. On Model WWP1170F (when used as Portable) reposition

machine to find ieve! area.

3. Gurgling noise. May be noticed when pump is operating.

1. Make sure all controls are set and the Cycle Selector is pulled out.

2

. Make sure electric cord is firmly plugged jn eiectrlcai outlet

3» Make sure faucets are turned on.

4. Check fuses and circuit breakers. (Plug lamp, fan or other small appliance

Into eiecihcai receptacle at washer to see if power is available.)

1. Make sure faucets are on and, adjusted correctiy

^

^

^

2. Make sure Unicouple connector is aitached property on Modei VVVVP1170F.
3. Make sure hoses are not kinked.

4. Check screen, iocated in water valve. (Unscrew fiii hose from washer.) Clean

If necessary When re-assembling fiil hose, make hand tight pius Vs turn with

pliers.

5. Make sure temperature control is set to MANUAL on Model WWP1170F,
(when used as portable).
1. Make sure faucets are adjusted to give desired temperature.

2. Check household water heater to make sure it is set to deliver correct
temperature—140“ to 150°F (60° to

66

°C).

3. Make sure Wash/Rinse Temp, Switch is set correctly on Model WWP1180F,
check faucet setting on Modei WWP1170F, (when used as Portable).

1. The washer normally pauses about one-half minute in progressing from one
portion of its cycle to the next.

IF V¥

a

SHER

still

DOES NOT OPERATE, cali for Service. ,

^

To keep yoyr washer looking good, wipe cabinet with a damp cloth. Occasionally wash it with mild

soap and water and then apply a light coat of appliance polish to help preserve the finish.

Advertising