Before you call for service – GE GTUP270GMWW User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before you call for service^

Washer Operation

Possible Causes

What to do

Washer won’t operate

Washer is unplugged

Make sure cord is plugged securely into a working outlet.

Water supply is turned off

Turn both hot and cold faucets fully on.

Controls are not set prop­
erly

Check controls.

Lid is open-safety feature
prevents agitation and
spinning when lid is up

Close lid and reset cycle, to the beginning if necessary.

Circuit breaker/fuse is
tripped/blown

Check house circuit breakers/fuses. Replace fuses or reset breaker.
Washer should have separate outlet.

Electronics need to be reset

Unplug washer, wait 2 minutes, plug back in and press START.

START was not pressed

Press START.

Lid magnet missing

Call for service.

Movement inside
machine when shut
off

Shifting mechanism is dis­
engaging the motor

When the machine is manually turned off, the shifter will
disengage the motor before completely shutting down.

If lid is raised before the motor is disengaged, it will resume

when lid is closed.

Washer Performance

Possible Causes

What to do

Clothes too wet

Incorrect spin cycle selected

Make sure the spin cycle selected matches the load you are

washing. Some fabrics will feel wetter when rinsed with cold water.

Colored spots

Incorrect use offabric
softener

Check fabric softener package for instructions and follow directions

for using dispenser.

Pretreat stain and rewash.

Dyetransfer

Sort whites or lightly colored items from dark colors

Grayed or yellowed
clothes

Not enough detergent

Use more detergent (especially with larger loads). Be sure to follow

detergent manufacturer's directions.

Hard water

Use a water conditioner like Calgon brand or install

a water softener.

Water is not hot enough

Make sure water heater is delivering water at 120°F-140°F (48°C-

60°C).

Washer is overloaded

Select load size to match clothes load.

Detergent is not dissolving

Add detergent as wash basketfills with water before you load
clothes.

Dyetransfer

Sort clothes by color. Iffabric label states wash separately,
unstable dyes may be indicated.

Lint or residue on
clothes

Clothes are air or line dried

Ifyou do not dryyour clothes with a clothes dryer, your
clothes may retain more lint.

Incorrect sorting

Separate lint producers from lint collectors.

Washing too long

Wash small loads for a shorter time than larger loads

Detergent not dissolving

Add detergent as wash basket fills with water, before you load
clothes.

Try a liquid detergent.

Use warmer water temperature.

Overloading

Load clothes no higher than the top row of holes in the washer
basket.

Incorrect use offabric
softener

Check fabric softener package for instructions and follow directions

for using dispenser.

14

Advertising
This manual is related to the following products: