Operating the self-cleaning oven, Before a clean cycle, Masbñ^iwím – GE 164D2966P127-I User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATING THE SELF-CLEANING OVEN

Normal Cleaning Time: 3 hours

Before a Clean Cycle

1. Remove the broiler pan, broiler rack, all cookware

and any aluminum foil from the oven—they can’t
withstand the high cleaning temperatures.

NOTE: The oven shelves may be cleaned in
the self-cleaning oven.

However, they will darken,

lose their luster and become hard to slide. Wipe the
shelf supports with cooking oil after self-cleaning
to make shelves slide more easily.

2. Wipe up heavy soil on the oven bottom. If you

use soap, rinse thoroughly before self-cleaning
to prevent staining.

Oven

vent

grille

Oven ■

front

frame

I

// I I \ \ \

\ \\^

masBñ^iwím

■ Oven

light

Openings Oven door

in door gasket

3. Clean spatters or soil on the oven front frame and

the oven door outside the gasket with a dampened
cloth. The oven front frame and the oven door
outside the gasket do not get cleaned by the self­
clean cycle. On these areas, use detergent and hot

water or a soap-filled steel wool pad. Rinse well
with a vinegar and water solution. This will help
prevent a brown residue from forming when the
oven is heated. Buff these areas with a dry cloth.
Do not clean the gasket.

Clean the top, sides and outside front of the oven
door with soap and water. Also use soap and water
to clean under the oven vent grille.

Do not use

abrasives or oven cleaners.

Make sure the oven light bulb cover is in place.

Do not rub or clean the door gasket—

the fiberglass material of the gasket has an
extremely low resistance to abrasion. An intact

and well-fitting oven door gasket is essential for
energy-efficient oven operation and good baking
results. If you notice the gasket becoming worn,
frayed or damaged in any way or if it has become
displaced on the door, you should have it replaced.

Do not let water run down through openings in
the top of the door.

To help prevent water from

getting in these slots when cleaning, open the door
as far as it will go.

4. Close the oven door and make sure the oven

light is off. If the oven light is not turned off,
the life of the bulb will be shortened or it may
bum out immediately. The door latches
automatically after the clean cycle is set.

Do not use commercial oven cleaners or oven
protectors in or near the self-cleaning oven.

A combination of any of these products plus the
high clean-cycle temperature may damage the
porcelain finish of the oven.

Important

The oven door must be closed and all controls must
be set correctly for the clean cycle to work properly.

30

Advertising