Broiler pan and rack lower oven, Light replacement lower oven, Glass window – GE 164D2966P127-I User Manual

Page 37: Painted surfaces

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Broiler Pan and Rack

Lower Oven

After broiling,

remove the broiler pan from the

oven. Remove the rack from the pan. Carefully pour
out grease from the pan into a proper container. Wash
and rinse the broiler pan and rack in hot water with a
soap-filled or plastic scouring pad.

If food has burned on,

sprinkle the rack with

detergent while hot and cover with wet paper
towels or a dishcloth. Soaking the pan will remove
burned-on foods.

Both the broiler pan and rack may be cleaned with a
commercial oven cleaner.

Both thè broiler pan and rack can also be cleaned in
the dishwasher. .

Do not store a soiled broiler pan and rack anywhere in
the cooking center.

Do not clean the broiler pan or rack in the
self-cleaning oven.

Light Replacement

Lower Oven

CAUTION: Before replacing your oven light bulb,
disconnect the electric power for your oven at the
main fuse or circuit breaker panel.

Be sure to let the light cover and bulb cool completely
before removing or replacing them. When in use, light
bulbs can become warm enough to break if touched
with a moist cloth or towel. When cleaning, avoid
touching warm lights with cleaning cloths if the light
cover is removed.

The oven light (bulb) is covered with a removable glass
cover which is held in place with a wire. Remove the
oven door, if desired, to reach the cover easily.

Wire Cover Holder

To remove:

• Hold your hand under

the cover so it doesn’t
fall when released. With
fingers of the same
hand, firmly push back
the wire cover holder.
Lift off the cover.

DO NOT REMOVE
ANY SCREWS.

• Replace bulb with 40-watt home appliance bulb.

To replace cover:

• Place it into the groove of the light receptacle. Pull

the wire forward to the center of cover until it snaps
in place. When in place, the wire holds the cover
firmly. Be certain the wire is in the depression in the
center of the cover.

• Connect electric power to the oven.

n

&9

0

a

Q

&9
0

0

(JQ

Glass Window

To clean the outside of the oven window,

use a glass

cleaner. Rinse and polish with a dry cloth.

Do not allow the water or cleaner to run
down inside openings in the top of the oven door
while cleaning.

Painted Surfaces

Painted surfaces include the control panel and grill.
Clean these areas with soap and water or a vinegar
and water solution.

Do not use commercial oven

cleaners, cleansing powders, steel wool or harsh
abrasives on any painted surface.

37

Advertising