GE J7912-30" - Manual (Page 22)

Care and cleaning of the oven.
Be sure electrical power Is off and all surfaces are cool before cleaning any part of the oven.
How to Remove Packaging Tape
To assure no damage is done to tJie finisli
of die jii'oduct, the safest way to remove
the adhesive left from packaging tape
on new appliances is an application
of a household liquid dishwashing
detergent, mineral oil or cooking oil. Apply with a soft cloth and allow' to soak.
Wipe diy and then apply an appliance
polish to thoroughh’ clean and protect
the surface.
NOTE: The plastic tape must be removed from all
chrome trim. It cannot be removed if It is baked on.
Oven Light Bulb
NOTE: The glass cover (on some models} should
be removed only when cold. Wearing latex gloves
may offer a better grip.
Beftire replacing the bulb, disconnect
electrical pow'er to the oven at the main
fuse or circuit breaker panel. Let the
bulb cool completely before remming it.
For your safet)', do not touch a hot bulb
with a damp cloth. If you do, the bulb
will break.
To remove:
Turn the glass cover counterclockwise
1/4 turn until the tabs of the glass cover
clear the grooves of the socket. Remove
the bulb.
To replace:
Put in a new' 40-w'att appliance bulb.
Place the fcibs of the glass cover into the
grooves of the socket. Turn the glass
cover clockwise 1/4 turn.
NOTE:
A 40-watt appliance bulb is smaller than a
standard 40-watt household bulb.
■ ■■ Install and tighten the cover clockwise.
■ ■■ Reconnect electrical power to the oven.
■ For improved lighting inside the oven, clean
the glass cover frequently using a wet cloth.
This should be done when the oven is
completely cool.
22