GE 29831 - Manual (Page 29)

REMOTE
OPERATION
3rd Menu
“Press 4 to record new announcement. Press 4 again to stop.
Press 5 to record memo. Press 5 again to stop.
Press
6 to turn on.
Press # to turn off.
Press
3 for other functions.”
Note: Only the 1st menu will play unless you press 3 to reach the
next menus.
E.
Touch
Tone
Commands
1
J
Remote Message Play — Pressing 1 for message play will cause
the unit to start playing all messages from beginning to end. The
answerer will voice prompt for the 0 key for erasure at the end of
each message allowing 3 seconds for the 0 key to be pressed if
message is to be erased, then the unit will voice “message
number” then play the next message.
Message Stop — Pressing * for ‘STOP’ at anytime will terminate
message playback. You will then hear the 3 tone prompt.
Remote Message Repeat — During message playback, pressing 8
for ‘REPEAT during a message will cause the unit to restart the
same mesage.
Remote Message Skip — During message playback, pressing 9
for ‘SKIP’ during a message will cause the unit to stop playing the
present message and start playing the next message.
Previous Message Play — During message play, pressing 7 will
terminate present message and play previous message.
Remote Announcement Change — After the beep press 4 to start
recording new announcement. After the beep speak into the phone.
Press
4 again to stop.
Remote Announcement Playback — Press 2 to play
announcement. If there is no announcement, the unit will speak the
default announcement: “Please leave message after tone.”
Remote Memo — After the beep, press 5 to start recording memo.
After the beep, speak into the phone. Press 5 again to stop.
Remote Turn Off — Press # to turn answering machine off.
#
26