4G Systems XSBox R4v - Manual (Page 22)

User Manual
22
Step 1 - Configure WLAN connection
START >> System control >> Network connections
1. Click with the right-hand mouse button on wireless network connection and select the entry properties in
the context menu.
2. The dialogue Wireless network connection properties appears.
3. Ensure that the control box Internet protocol (TCP/IP) is activated in the register General.
4. Highlight the internet protocol (TCP/IP), and click on the button Properties.
The dialogue Internet Protocol properties (TCP/IP) will appear.
5. Activate the option field get IP address automatically in the General register (Standard setting)
6. and click on the button OK.
7. Click in the dialogue Wireless network connection properties on the button Close.
8. you will then be requested to reboot the computer again if necessary.
Step 2 - Establish WLAN connection
START >> System control >> Network connections
1. Click with the right-hand mouse button on wireless network connection and select the entry Show availa-
ble wireless networks in the context menu.
2. The dialogue Wireless network connection appears.
3. Highlight the wireless network XSBoxR4v and click on the button connect.
4. It will take approximately 10 seconds until the connection between your PC/laptop and the XSBoxR4v is esta-
blished.