Kenmore Elite 79575559400 - Manual (Page 12)

refrigerator installation
HOWTO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT: To avoid possible injury, product or property
damage, you will need two people to perform the following
instructions.
1. Removing Pullout Drawer
• Pull the drawer open to full extension. Remove the
lower basket (1) by lifting basket from rail system.
Remove the screw (2) from each side of rail system.
Lift the top of door to unhook door supports from rail
system. Lift door up to remove.
A CAUTION: When you remove the drawer, do not hold
handle. If it comes off, it could cause personal injury.
A CAUTION: When laying down the drawer, be careful
not to damage the floor or hurt your feet by the sharp
edges on hinge side.
2. Installing Pullout Drawer
• Pull both rails (1) out to full extension.
Hook the door supports (2) into the rail tabs (3), as
illustrated, and lower the door into final position. And
tighten the screw (4).
With the drawer pulled out to full extension, insert the
lower basket (5) in the rail assembly until it doesn’t
move forward.
A WARNING: To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to
play inside of drawer.
A WARNING: DO NOT step or sit down on Freezer Door.
12