Kenmore 5303304549 - Manual (Page 8)

EUSZiS
Setting
(continued)
Oven Controls ^
3.,
Push in and turn the griddle control in either direction to the desired setting
Start most cooking operations on a higher setting; then turn to a lower setting
to finish cooking.
The controls do not have to be set exactly on a particular mark, Use the marks
as a guide and adjust the control as needed
The griddie indicator light glows when the griddle is on. A quick glance at
the light when cooking isf inished is a n easy check to be sure the control is turned
off.
Preheat for a few minutes (until butter melts or beads of water dance on the
griddle).
Use only nylon or plastic spatulas, spoons, etc. Metal can scratch the non­
stick finish.
’
Make sure the griddle is turned OFF when cooking is finished Leaving the
griddle ON will damage it.
Approximate Griddle Settings
Bacon H!
Grilled Sandwiches HI
Pancakes HI
Hamburgers MED-Hl
Eggs MED
31 Use precaution when
using the automatic timer, Use the
automatic timer to cook cured or
frozen meats and most fruits and
vegetables,. Foods that can easily spoil,
such as milk, eggs, fish, poultry or
meat, should be chilled in the
refrigerator Even when chilled, they
should not stand in the oven for more
than two hours before cooking begins,
and should be removed promptly when
cooking is completed.
Timed Bake
The automatic timer will turn the oven on and off at the times you select in
advance
The oven can be programmed to start immediately and shut off
automatically, or, to start at a delayed time and shut off automatically,
1, Be sure that the dock shows the correct time of day,
2,, Place the food in the oven and dose the door.
3
Push and hold START button until the control beeps and the words
START TIME appear in the left side of the display.
4, Turn set knob clockwise until the desired starting time is reached . Time will
increase or decrease in 5 minute increments,
®lf you want to start now and shut off automatically, then go to step #5 If
you want to start at a delayed time and shut off automaticaily, you must
change the start time,,
5, Push start button, control will beep once and the words STOP TIME will
appear in the left side of the display
6 . Turn SET knob until desired stop time is reached.
7. Push START button. The control will beep once and the word AUTO will
flash in the upper left of the display,
8 Turn the temperature control to the desired temperature.
9 Turn the selector to T. BAKE.
«When desired start time is reached, the control will beep once and the
word AUTO will start flashing and remain on during baking.
»To cancel automatic baking at any time, push the STOP/CANCEL button
twice
•At the end of automatic baking, the timer will sound for 3 seconds, AUTO
will flash rapidly to indicate the end of automatic cycle. The alarm will
continue to sound
1/2 second every 10 seconds for 15 minutes or until
STOP/CANCEL button is pushed.
•To review, start and stop time settings before automatic cycle begins, push
and hold START button until START TIME appears; push second time to
display STOP TIME and once more to return to automatic control mode
•When changing the start and stop times, time will increase and decrease in
5 minute increments