Operating the warmer drawer, Warmer drawer food temperature settings, Setting warmer drawer controls – Kenmore ELITE 790.367 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Arranging Warmer (Warm & Ready^“) Drawer Rack Positions

The rack can be used in 2 ways:

In the

upright position

to allow low profile food items to be placed both under and on top of the rack (for example,

rolls or biscuits on top of the rack and a casserole dish underneath).

In the

downward position

to allow you to place light weight food items and empty dishware (for example, rolls or

pastries and dinner plates) on the rack.

Set the Warmer Drawer Rack in either position as shown below (Figure 1).

Setting Warmer Drawer Controls

Operating the Warmer Drawer

The purpose of the Warmer Drawer is to keep hot cooked foods at serving temperature. Always start with hot food. It is
not recommended to heat cold food in the Warmer Drawer. All food placed in the Warmer Drawer should be covered
with a lid or aluminum foil to maintain quality.

Do not use plastic wrap to cover food.

Plastic

may melt onto the

drawer and be very difficult to clean.

Use only utensils and cookware recommended for oven use in the Warmer

Drawer.

ik CAUTION

I Always use potholders or oven mitts when removing food from the Warmer Drawer as cookware and

plates will be hot and you can be burned.

Warmer Drawer Food Temperature Settings

Use the recommended settings in the Warmer Drawer settings table. If a
particular food is not listed, start with the

MED

setting. If more crispness

is desired, remove the lid or aluminum foil from the food. Most foods can
be kept at serving temperatures on the

MED

setting. When a

combination of foods are to be kept warm (for instance, meat with 2
vegetables and rolls), use the

HI

setting. To avoid heat loss, do not

open the Warmer Drawer repeatedly while in use.

Warmer (Warm & Ready^”) Drawer & Bread Proofing

Indicator Lights

The control and indicator lights forthe Warmer Drawer and Bread

Proofing features are located on the control panel. The indicator lights

will turn ON when the control is set, and remain ON until the controls are
turned OFF.

Note: The

warmer Drawer will not operate during the Self-Clean

cycle.

Warmer Drawer Settings Table

Food Item

Setting

Bacon

HI

Flamburger Patties

HI

Poultry

HI

Pork Chops

HI

Fried Foods

HI

Pizza

HI

Gravies

MED

Casseroles

MED

Eggs

MED

Roasts (Beef, Pork, Lamb)

MED

Vegetables

MED

Biscuits

MED

Rolls, hard

MED

Pastries

MED

Roils (soft)

LO

Empty Dinner Plates

LO

Figure 2

34

Advertising
This manual is related to the following products: