Operating, Controls (cont’d.), Using your humidifier – Kenmore 758.15408 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operating

the

Controls (cont’d.)

Speed Button

Q

This humidifier is equipped with a 3-
speed fan control. Initially depressing the
speed button will display the current
speed setting. Each push of the speed
button advances the mode through the
settings of

(HIGH) F3, (MEDIUM)

F2,

(LOW) F1 and (AUTO) A.

The selected setting Is displayed on the
digital readout. The higher the setting, the
faster water is evaporated and released

into the air.

F1 (LOW)

is the quietest

setting and is provided for conditions that
do not require a rapid evaporation rate.
When

(AUTO) A

is selected the

humidifier will determine the required fan
speed needed to bring the actual room
humidity up to the set humidity.

Speed Button.

Humidity

Control

m

This button allows you to adjust the

humidity to suit your needs. This humidifier

will automatically cycle on and off as

required to maintain the selected setting.

The readout displays both actual

(ROOM)

and desired

(SET)

humidity percentage

(%) settings when humidity control button
Is pressed. The

ROOM

readout has a

range of 20% to 95%. If the room humidity
level is equal to or less than 20% the
display will show a flashing 20.

The

SET

readout has a range of 25% to

65% and is adjusted in increments of 5%.
Initially depressing the humidity button
will display the current humidity setting.
Each additional press of the button
increases the setting by 5%. A

SET

point

of 65% operates the humidifier
continuously regardless of the

ROOM

reading. The humldistat that senses the
readings is located on the power cord.
Insure that it is free from obstruction.

Humidity

Button ,

Quiet Comfort

3CÌ

Using Your Humidifier

Refill Display

For maximum run time both the bottle
and the base should be filled. When both

the bottle and the base empties the
display alternates the room humidity

reading and “F” (FILL), informing
additional water is required. Also at this

time the unit will automatically switch into

DRY

OUT

MODE

and continue to run on

the lowest speed until the filter is dry.

-*

----------------

Quiet Comfort

r

J

/

J

Refill/Dry

Out

Mode

Display

Advertising