General care, Cleaning – Kenmore 790.9659 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

General Care

&

Cleaning

• Cleaning Table

Surfaces:

How to Clean:

Aluminum & Vinyl

Use hot, soapy water and a cloth. Dry with a clean cloth.

Painted & plastic control
panel parts & decorative

trims

For general cleaning,

use hot, soapy water and a cloth.

For more difficult soil and built-up

grease,

apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes.

Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these materials;

they can scratch.

Glass control panel

Ì4CAUTION

a

COOKTOP
LOCKOUT

Before cleaning the glass control panel

make sure all cooktop controls are

set to OFF and activate the Cooktop Lockout feature (See page 8 for complete Cooktop

Lockout instructions).

Clean using hot, soapy water and a dishcloth then rinse with clean water. Be sure to
squeeze excess water from the cloth before wiping the panel; especially when wiping
around the controls. Excess water in or around the controls may cause damage to the
appliance.

DO NOT use abrasive cleaners. This type of cleaner will permanently scratch the glass

control panel. DO NOT place or leave cleaning supplies on the ceramic cooktop while
cleaning the glass control panel. Move these items to a kitchen counter-top. To finish
cleaning orfor lighter soil use a typical household glass cleaner and paper towels.

Stainless Steel, chrome

Clean Stainless Steel with hot, soapy water and a dishcloth. Rinse with clean water and a

control panel & metal

cloth. Do not use cleaners with high concentrations of chlorides or chlorines. Do not

decorative trims

use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made for
cleaning Stainless Steel. Always be sure to rinse the cleaners from the surface as bluish
stains may occur during heating that cannot be removed.

rii

¥

L ■

m

Porcelain enamel broiler
pan & insert, door liner,
body parts & interior

Warmer Drawerarea

Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a

1 : 1

solution of clear water and ammonia.

If necessary,

cover difficult spots with an ammonia-

soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and
then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove
all cleaners or the porcelain may become damaged during future heating. DO NOT use
spray oven cleaners on the cooktop.

Porcelain oven racks

Porcelain oven racks may be left in the oven during the Self-Clean cycle. If further cleaning
is required, remove the racks after the oven has cooled & clean using a mild non-abrasive

cleaner following manufacturer's instructions. Rinse with dean water and let dry. After the
Self-Clean cycle is done and the oven has cooled, rub the sides of the oven racks with wax
paper or a cloth containing a small amount of vegetable oil. This will make the racks glide
easier into the oven rack positions.

Oven door

Ceramic Cooktop

To clean oven door remove following the door removal instructions in this Use & Care Guide.
Wash soiled areas with hot, soapy water and a clean cloth. DO NOT immerse the door in
water.

DO NOT clean the oven door gasket. On Self-Cleaning models the oven door gasket is
made of a woven material which is essential for a good seal. Care should be taken not to
rub, damage or remove this gasket.

Follow the instructions the “Cooktop Cleaning & Maintenance” in this Use & Care Guide.

39

Advertising