Kenmore 116.32289 - Manual (Page 10)

TO STORE ATTACHMENTS
Remove dusting brush or upholstery tool.
Snap into appropriate storage location.
Remove crevice tool from the wand by
twisting. Lay aside.
Remove the extension wand from the
hose. Twist the wand to the left and pull
from the hose end
- Lower
Wand ^
Locking
Ring —k
— Upper
Wand
Unlock the wand by turning the wand
locking ring to the UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com­
pressed wand. Snap into the appropriate
storage location.
Be sure the unit is turned off. Reinsert the
hose fully into the opening on the lower
body from which it was removed. Press
firmly to assure connection.
WARNING
Personal Injury Hazard
DO NOT place hands or feet under­
neath the unit when inserting the
hose. The agitator begins to
revolve rapidly when the vacuum is
turned on.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property damage could result,
TO USE EXTENSSON HOSE
SOME MODELS
The stretch hose attached to the vacuum
cleaner has two “J” shaped slots in the
end where attachments fit.
The extension hose has two tabs on the
end that can be pushed into the slots and
twisted to attach the two hoses together.
Attachments and the telescoping wand
can be attached to the other end of the
extension hose for additional reach.
If your model did not come with an
extension hose, you can purchase one at
any SEARS retail store with part number
20-52571. In Canada 20-40975.
A
CAUTION
When using the regular hose or
with the extension hose attached,
the cleaner should be on a solid
surface on the same level or below
the level of the user’s feet. DO NOT
use the hoses when the cleaner is
above the level of the user’s feet.
ATTACHMENT USE CHART
CLEANING AREA
ATTACHMENT
Furniture*
Between
Cushions* Drapes* Stairs Walls
DUSTING BRUSH
&
X X X
CREVICE TOOL X X X
FABRIC BRUSH ^
X X X
•Always dean attachments before using on fabrics.
10