Instructions, Stopping or interrupting a self-cleaning cycle, Adjusting oven temperature – Kenmore 790.75603 User Manual

Page 36: To adjust the oven temperature higher, To adjust the oven temperature lower, Press, Display, Adjusting the oven temperature, Self-cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Self-Cleaning

INSTRUCTIONS

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle

due to excessive smoke or fire in the oven:

1. Press [STOP

PRESS

2. Once the oven has cooled down tor approximately 1 HOUR

and the "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened {Figure 1}.

Note: Self-Clean cycle can never be set to start more than 12 hours in advance.

DISPLAY

Figure 1

Adjusting Oven Temperature

The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you can adjust the actual oven
temperature to be more or less than what is displayed. Before adjusting, test a recipe
by using a temperature setting that is higher or iower than the recommended
temperature. The baking results should heip you to decide how much of an adjustment

is needed.

INSTRUCTIONS

To adjust the oven temperature higher

1. Press (Bake) for 6 seconds {Figure 2).

2. To increase the temperature use the number pads to enter the

desired change. (Example 30°F)

(Figure 3). The

temperature may be increased as much as 35°F (19°C).

3. Press START to accept the temperature change and the display

will return to the time of day (Figure 4}. Press to reject the

change if necessary.

To adjust the oven temperature lower

1. Press Bake for 6 seconds. 0° will appear in the display (Figure 5).

2. To decrease the temperature use the number pads to enter the

desired change. (Example -30°F)

press

(Figure 6). The temperature may be decreased as much as 35°F
(19°C}.

3. Press START : to accept the temperature change and the display

wili return to the time of day (Figure 7}. Press ^

stop

J to reject the

change if necessary.

PRESS

{ Bake :

START

; or

Bake ,

START or

Note: The oven
temperature adjustments
made with this feature wiii
not change the Self-Clean
cycle temperature.

DISPLAY

lO n

n n

l j u u u

Figure 2

ion qn“

f » j u ^ ^

Figure 3

1:30

Figure 4

lO n n n

l-JU uu

Figure 5

1:30 -30'

Figure 6

lOn

(Ou

Figure 7

36

Advertising