Accessories, Placement of needle, Needles, placement of needle – Kenmore 17921 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES
I I I
TPI
Use KENMORE needles. The size of the
needle should conform with the size of the
thread and both should be suitable to the
fabric. Kenmore needles are color-coded by
size for your convenience (See chart on
next page).
Never use a bent needle or one with a dull
point.
The exact length of your needle is shown at
left. Be sure you never use one in your
machine that is not this exact length.
You will find among your accessories a
•Q NKKDLK' -with blue shank. This special
needle is to be used when sewing knits and
certain difficult synthetic fabrics. If you
experience skipped stitches in any of your
sewing, use -Q
nkkdl
K"-and "Q FOOT"..
NEEDLES
PLACEMENT OF NEEDLE
Raise needle bar to its highest position by
turning the hand wheel toward you. Loosen
the needle clamp screw. Holding the needle
with the flat side away from you, slip the
needle into the needle bar. When it is in as far
as it will go, tighten the needle clamp screw
with small screwdriver provided in the
accessory box.
you
18