Adjusting stitch density – Kenmore 17921 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PURL-EDGE BUTTONHOLE
To add a professional touch to your sewing
you will want to make purledged button
holes. These are obtained by sewing a wide
buttonhole over a narrow stitched button
hole.
'
Choose the correct size for your button,
insert the template into the guide plate
turning to the narrower of the sizes. Use the
same settings as for regular buttonhole and
adjust stitch width control to 1.
Drop the guide plate over the pinion gear and
sew around the buttonhole once. (STEP 1)
To sew wider outer buttonhole, lift the guide
plate from the pinion gear and turn the
template to wider size. Adjust stitch width
setting to 1.5. and sew around buttonhole
again. (STEP 2)
STEP1
STEP 2
ADJUSTING STITCH DENSITY
Depending upon the fabrics on which you are
sewing, or your own preference in button
holes, you may alter buttonhole stitch density
by turning stitch density control knob.
1. For more density, turn the knob,toward
you.
2. For less density, turn the knob away from
you.
(D
55