Kenmore 721.62759 - Manual (Page 16)

Cooking at different cook powers (cont.)
1. Put food in oven and close the door.
2. Touch COOK TIME.
ENTER COOKING TIME scrolls across display.
Example for 7 minute. 30 seconds:
Touch “7 3 0”.
3. Touch POWER.
ENTER POWER LEVEL 1 TO 10 scrolls across
display.
Example for 50% cook power: Touch "5".
P-50 TOUCH START scrolls across display.
4. Touch START/ENTER.
(display counts down cooking time)
At end of cooking time, “END” will be displayed
and four tones will sound. The display will show
the time of day after you open the door or touch
OFF/CANCEL.
Cooking with more than one cook cycle
For best results, some recipes call for one Cook
Power for a certain length of time, and another Cook
Power for another length of time. Your oven can be
set to change from one to another automatically, for
up to three cycles (including Auto Defrost).
3. Set cook power for first cycle.
Touch POWER
Example for 50% cook power: Touch “5".
P-50 TOUCH START scrolls across display.
1. Put food in oven and close the door. ......................................................................
............................................................................ 4. Repeat Steps 2 and 3 to set the cook
^ „ . . . . . . . . . . . . time and cook power for the second
2. Set cooking time for first cycle. .
Touch COOK TIME cycle.
Example for 7 minute. 30 seconds: Touch “7 3 0”.
.............................................................................. 5. Touch START/ENTER.
After the first cycle is over, 2 tones will sound and
the next cycle(s) will count down.
At end of the cooking time, “END" will be displayed
and four tones will sound. The display will show the
time of day after you open the door or touch
OFF/CANCEL.
16