Turntable, Tones, Display messages – Kenmore 721.62759 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TURNTABLE
PROBLEM
CAUSE
The turntable will not turn.
• The turntable is not correctly In place. It should be correct-side up and sitting
firmly on the center shaft.
• The support is not operating correctly. Remove the turntable and restart the
oven. If the support still does not move, call an authorized service technician for
repair. Cooking without the turntable can give you poor results.
TONES
PROBLEM
CAUSE
:: You do not hear the
programming or end-of-
cycle tone.
• You have not entered the correct command.
DISPLAY MESSAGES
PROBLEM
CAUSE
The display is flashing “:
• There has been a power interruption. Reset the clock. (See the "Setting the
clock" section on Page 14.)
If none of these items are causing your problem, see the “Sears Toll-Free Numbers” section on Back Cover.
30