Water temp, To stop or restart your washer, Hang dry – Kenmore 110.24975 User Manual

Page 12: Normal speed, Heavy duly speed, Hang dry speed, Handwash plus fine délicates speed, Selecting ifash/spin speecjs

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

5. Close the washer lid.

6

.

Turn the Water Level selector to the correct setting for your

vi/ash load and the type of fabric being washed.

■ Choose a water level that allows the load to move freely

for best fabric care. See “Loading.”

■ You may change to a higher level setting after the washer

has started filling by turning the knob to a different
setting.

7. Set the Water Temperature selector to the correct setting for

the type of fabric and soils being washed. Use the warmest
water safe for fabric. Follow garment label instructions.

Water Temp

Use for

Hot

Whites and pastels

Heavy soils

Warm

Bright colors

Moderate to light soils

Cold

Colors that bleed or fade

Light soils

NOTE: In wash water temperatures colder than 70°F (21 ®C),
detergents do not dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like balls on the
surface of garments).

(OPTIONAL) An Automatic Temperature Control (АТС)
electronically senses and maintains a uniform water
temperature by regulating incoming hot and cold water.

■ Even in cold wash, some warm water is let into the

washer to maintain a minimum temperature of
approximately es^F (19“C).

■ Warm wash is maintained at approximately 95“F (35°С).

■ Warm rinse is maintained at approximately 70“F (21“C) for

all warm rinse settings.

8

.

(RINSE OPTIONS) You can customize your wash by adding
rinse Options to your cycie selections. A cycle will “start"
where you set the Cycle Selector Control (Timer) knob. See
“Selecting a Cycie and Time." The cycle will “stop” where you
set the Options Control knob. This knob has settings for:

■ One Rinse. Use this option for one rinse after a basic

wash cycle, Rinse & Spin, and Drain & Spin.

■ 2nd Rinse. A 2nd Rinse can be added to the Ultra Clean

cycle and to the Permanent Press II cycle.

■ Soak Only. Use this option for set-in stains and soil that

need extra time for removal.

■ Soak & Prewash. Select the prewash option to ensure

thorough cleaning of your heavily soiled and stained
loads.

■ Auto Advance after Prewash. This setting will save your

detergent from Prewash and automatically start the Ultra
Clean cycle. Expect a 2-minute pause between cycles.

NOTE: The Prewash cycle and Soak & Prewash Only option
should be followed by a main wash cycle with additional
detergent added. The Soak Only option should be followed
by a main wash cycle without additional detergent.

9. Set the Speeds Control knob according to the type of fabric

in the load. See “Selecting Wash/Spin Speeds.”

10. Push in the Cycle Selector Control (Timer) knob and turn it

clockwise to the wash cycle you want. Reduce the wash time

when using a small load size setting. See “Selecting a Cycle

and Time.”

Pull out the Cycle Selector Control (Timer) knob to start the

washer.

To stop or restart your washer

■ To stop the washer at any time, push in the Cycie Selector

Control (Timer) knob.

■ To restart the washer, close the lid (if open) and pull out

the Cycle Selector Control (Timer) knob.

Selecting Ifash/Spin SpeecJs

This section describes the wash/spin speeds you can select with
the Speeds control. Each speed setting is designed for different
types of fabric and soil levels.

D

elicate

SLOW/SLOW

normal

SLOW/FAST

H

eavy

D

uty

' FAST/FAST

HANDWASH PLUS

FINE DEUCATES

INTERMITTENT

EXTRA SLOW/SLOW

HANG D

ry

FAST/SLOW

Speeds Selector knob

Normal speed

This speed setting is for normally soiled cottons and linens.

Setting combines slow speed agitation and fast spin speeds to
shorten drying time.

Heavy Duly speed

This speed setting is for sturdy or heavily soiled loads. Setting

combines fast speed agitation and fast spin speeds.

Hang Dry speed

This speed setting is for sturdy permanent press fabrics that wili

be line dried. Setting combines fast speed agitation and slow
spin speeds to reduce wrinkling.

Handwash Plus Fine Délicates speed

Use this speed setting for hand washable and special-care items.

The wash action has repeating periods of extra-slow speed

agitation and soaking. Slow spin speeds help reduce wrinkling.

NOTE: Do not use this cycle for large items such as blankets.
Some “Hand Wash" items, particularly wool, naturally shrink

when washed. When still wet, block these items by gently

stretching to original measurements. Allow the items to dry fiat.

12

Advertising
This manual is related to the following products: