Select desired cycle, Dry temp (for use with time cycles only), Dry level (for use with auto cycles only) – Kenmore 6800 User Manual

Page 8: Wrinkle guard™ feature, 6» select cycle options (if desired), 5» set cycle settings, I a )( a; 11, Select, 6» select

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Press POWER button to turn on the dryer.

4

.

Select

desired cycle

Dry Temp (for use with Time Cycles only)

Press the Dry Temp button to change the drying temperature from
the default setting.

Dry Level (for use with Auto Cycles only)

Normal Dry Level is a good starting point for optimal energy
savings.

You can select a different Dry Level, depending on your load, by

pressing the button for More, Normal, or Less. Selecting More,
Normal, or Less automatically adjusts the Dry Level at which the
dryer will shut off. Once a Dry Level is set, it cannot be changed
without stopping the cycle.

Auto Dry cycles give the best drying in the shortest time. Drying

time varies based on fabric type, load size, and dryness setting.

NOTE: More Dry removes more load moisture. Normal Dry is used
for a starting point for Auto drying. Less Dry removes less moisture
and is used for loads you may want to put on a hanger
to complete drying.

EVENHEAT AUTO DRY

Normal

Wrinkle Guard™ feature

■ Get up to 60 or 150 minutes for models with two choices (90

minutes for models with only one choice) of heat-free, periodic
tumbling at the end of a cycle. Press the WRINKLE GUARD™
button to turn On or Off at any time before the cycle has
ended.

■ The WRINKLE GUARD™ feature is preset to “Off”. If selected

for other cycles, the WRINKLE GUARD™ feature setting will
remain “On” the next time that cycle is selected.

6» Select

cycle options (if desired)

A

Select the desired cycle for your load. See “Cycle Guide” or
“Control Panel and Features”.

EST!MATEDT!M& REMAINING

5

» Set cycle settings

High

Med High

Medium

I

■ More

1150 Min

Low

H Normal

160 Min

Air Only

m Less

■ off

Dry Temp

Dry Le

Wrinkle

Guard

TIME CYCLES ONLY Al ■

[i a )( a; 11

(i

Damp

Signal

Cycle

Signal

AUTO CYCLES ONLY OFF/LOW/HIGH

Press appropriate button for selected options, if desired. For

Time Cycles, press More Time if you want to increase the cycle

length, or press Less Time if you want to decrease the cycle
length. Less Time and More Time options are available with

Time Cycles only.

NOTE: Not all options and settings are available with all cycles.

The default cycle settings will illuminate based on the cycle
selected. See “Cycle Guide”. For some cycles, you may select
alternate settings by pressing the button for that setting.

NOTE: Not all options and settings are available with all cycles.

Advertising
This manual is related to the following products: