Care and gl.eaning – Kenmore 100.90007 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CARE AND GL.EANING

CLEANING THE COFFEEMAKER AND CHANGING THE CHARCOAL FILTER

After ewery 70 cycles, or carafes of coffee, a ramindsr will appear in Ihe conlroi panel
display, change filter and ctean along wish three beeps, to tell Ihe user It is lima to clean
the inside of the coifeemaksr of ati mineral buildup, and to ohanga Ihe water fillsr-

Minerai deposits left by hard wafer can clog your coffeemaker, Cleaning is recommended
about every 70 usas, when the coffaamaker’s reminder iets you know you have reached
Ihis poin!

To Ciean;

1,- Press the Filter Reset button on the control

pane) to slop the brtnking words icon and
the beeps (Fig 6)

a Open the lid of reservoir, and pull out the

water filler Do not dean colfeemaker with
water tiller in place (Fig 9)

3, Pour while vinegar into water reservoir up

to about tile B-ctip level shown inside reservoir

4, Add cold water up to the 12-cup line ,

5, Put a paper llller in the brew basket- ciosa

cover, and place empty carafe on Ihe
warming plate.

6 Turn ON the coffeemaker and ist hail of the

vinegar water solution brew through and
into carafe.

7. Turn the coffeemaker OFF at this point and

iel it soak for at least IS minutes to soften

any deposits.

B Turn the coffeemaker back ON and brew the

remaining solution into tha carats When brew

cycfe has stopped, turn OFF coffeemaker,
empty carafe, and discard soiled paper iilter.

9- Refill reservoir with cold water and lurn ON fo

run another brew cycie You may want to repeat
again to ailminats any vinegar smeil/lasle.

10, Wash the brew basket and carafe,,

11 Open the Water Fitter, puli ou! lira old

charcoal, discard and replaça with a
new one (Fig, 10).

12 Place the Wafer Fllier with new charcoai

Into the reservoir Cofleemaker is ctaanod
and ready tor use

To reset the cycle count and remove the

reminder in the control panel display, push the
“Fitter Reset” button

10

Advertising