Connect the filter to a faucet, Fig. 3 – Kenmore 625.34551 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECT THE FILTER TO A FAUCET
1. Remove the aerator from the fau
cet, FIG. 3A.
2. Install and tighten the diverter
valve as shown in FIG. 3B or 3C,
The top of the diverter turns, like
the end fitting on a garden hose.
B. Install diverter only, directly to ex
ternal faucet threads.
C. Install diverter and adaptor, with
gasket
(2
sizes included), to internal
faucet threads. Use the adaptor and
gasket that fits your faucet.
Note: Most hardware stores have
other adaptors to fit different t)^es
of faucets.
3. Place the filter in the desired loca
tion on the countertop (the filter
has a 3 ft water supply tubing
length). Route the supply tubing
out of the way.
FIG. 3