Replacing the carbon filter cartridge (cont.), Service check list – Kenmore 625.34551 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REPLACING THE CARBON FILTER
CARTRIDGE (cont.)
To replace the cartridge, follow
steps 1'6 on page 3. Be sure to clean
the inside of the sump. Cleaners are
available from Sears (see the parts
list on page 7), or use hot, soapy wa
ter. After replacing the cartridge,
flush the cartridge for 2 - 3 minutes
to remove harmless carbon fines (see
note on page 5).
SERVICE CHECK LIST
Filtered water has bad
taste and/or odor
-
The carbon cartridge needs replacing.
Fine, black particles In
filtered water.
-
This is harmless carbon “fines" from a new
cartridge. Discard the first few cupfuls of fil
tered water after changing the cartridge.
No water flow from the
filter.
- Cold water faucet and/or diverter valve not
opened.
- Supply tubing, from diverter valve to filter,
pinched or plugged.
- The carbon cartridge needs replacing.