Kenmore 251.90701 - Manual (Page 7)

RECEIVER SETTING INSTRUCTION
Guía de Uso y Cuidados
SENSOR ICON (1) ( Sii ) flashes, indicating
signal is being received from the main unit.
If no signal is being received, the icon (M )
1 appear. The temperature (8) and humidity
(9) reading will show 00 00.
BATTERY POWER INDICATOR (2) displays
battery power level from full to low power:
When low, indicator will flash. / | \
SOUND ON/OFF (3) Alert will sound when
there is a receiving error and/or when
BUCKET FULL (6) is activated. The sound
alert is optional and may be turned off using
SWITCH (14).
FAN ON INDICATOR (5) rotates when the
fan is on.
BUCKET FULL (6) icon flashes when the
bucket is full. A sound alert is also an option
(See Sound On/Off.)
PUMP ON (7) icon flashes when pump
feature has been pre-selected on the main
unit and the pump is operating.
TEMPERATURE (8) display shows the
current temperature near the main unit.
SETTING PREFERENCES
Press SET (11) once to enter the "Setting
Mode." Press SET (11) and hold down for
3 seconds to check your Receiver version.
SET HOUR OF DAY (4) Press
SET (11) a second time. Hour will
begin flashing. Then press + (13) or
-(12)0© to set the hour 1-12 AM
or 1-12 PM.
SET MINUTES (4) Press SET (11) a
third time. Minutes will begin flashing.
Use oe to set the minutes 00-59.
24-HOUR CLOCK (4) Press SET
(11) a fourth time. Use
oe
to
toggle between 12H/24H clock.
FARENHEIT OR CELSIUS (8) Press
SET (11) a fifth time. Use
oe
to
toggle between °C/°F
EXIT SETTING MODE by pressing
SET (11) a sixth time.
HUMIDITY (9) display shows the current
humidity level near the main unit when re­
ceiver and main unit are operating properly.
HANGER HOLE (10) for optional wall
mounting.
Deshumidificador
con Estación Remota Inalámbrica (je Monitorización
Mo(jelo 251.99701801
seguridad e instrucciones antes
de operar este equipo.
12
Sears, Roebuck and Co. Hoffman Estates, IL 60179 U.S.A. www.sears.com