Press timer on-off, To change the timer while it is in use, Notes – FRIGIDAIRE Range User Manual

Page 11: Setting bake, To set bake, Note, 3 important, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SETTING OVEN CONTROLS

Setting the minote timer

1.

Press

timer on-off.

2. Press the A to increase the time in one minute

increments. Press and hold the A to increase the

time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59

minutes.

Note:

If the

V

pad is pressed first, the timer will

advance to 11 hours and 59 minutes.

3. When the set time has run out, the timer will sound a 3

second tone. 0:00 will show in the display until

timer

on-off

is pressed.

To change the timer while it is in use

While the timer is active and shows in the display, press

and hold the

A or V

to increase or decrease the time

remaining.

To cancel the minute timer before the set time has

run out

Press

timer on-off

once.

%

NOTES

• The minute timer

will not

start or stop the cooking

process. It serves as an extra timer in the kitchen that

will beep when the set time has run out. The minute
timer can be used alone or while using any of the other
oven features.

• If another feature is active when the minute timer is

active, the minute timer will show in the display. To
view information about other active features, press the
pad for that feature.

Setting bake

The oven can be programmed to bake at any temperature
from 170°F to

550°F

(77°C to 287°C). The factory preset

bake temperature is 350°F (177°C).

To set bake

1.

Press

bake. "-------

" appears in the display.

2. Within 5 seconds, press the

A or V

■ The display

will show "350°F (177°C)." By pressing and holding

the

A or V

, the temperature can then be adjusted

in 5°F increments (1°C if the control is setto display

Celsius).

3. As soon as the

A or V

pad is released, the oven

will begin preheating to the selected temperature.
When the oven reaches the desired baking
temperature, the control will beep once.

To change the oven temperature after bake has
started

1.

Press

bake.

Visually check the bake temperature and

that it needs to be changed.

2. Press the

A or V

pad to increase or decrease the

set temperature to the desired new oven temperature.

NOTE

To cancel baking at any time, press

clear off.

3 IMPORTANT

Dark or dull pans absorb more heat than shiny bakeware
resulting in dark or overbrowning of foods. It may be
necessary to reduce the oven temperature or cook time

to prevent overbrowning of some foods. Dark pans are

recommended for pies. Shiny pans are recommended

for cakes, cookies and muffins.

11

Advertising