Concord Camera Eye-Q 2133z - Manual (Page 13)

9
10. Video Out Jack: Connect your video out cable here
and then the other end to your television set in order
to use the camera as a digital video camera.
11. USB Port: The USB (Universal Serial Bus) port is
used to connect the camera to a PC as well as for
transferring photos.
12. Hand Strap Loop: Attach the hand strap to this loop
for ease of carrying.
13. Mode Dial: Rotate to select the camera mode:
Video, Preset, Snapshot, Playback, SET UP or PC
Camera.
14. Down Button: Used to move down through
menus and to cycle in a right-wards direction during
picture Playback.
15. Up Button: Used to move up through menus and
to cycle in a left-wards direction during picture
Playback.
16. Display Button: Press to cycle through the various
display options: LCD, backlight and status
information all turned on; LCD and backlight on but
no status information; and LCD off.
17. LCD Display: Use the LCD display to preview photos.
While in the SET UP menu, use the LCD to see
messages and configure the camera.