Warning, Handle assembly, Caution – Kenmore 116.34924 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any instructions
given. WARNING statements alert you to such dangers as fire, electric shock, burns
and personal injury. CAUTION statements alert you to such dangerous personal
injury and/or property damage.
I
i
A
WARNING
Electrical Shock Hazard
Do not plug into the electrical sup
ply until the assembly is complete.
Failure to do so could result In elec
trical shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate REPAIR PARTS LIST. Use
this list to verify that you have received all
the components of your new Kenmore vacu
um cleaner.
Attach stretch
hose end to
nozzle until
hose end
locks into
place.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum cleaner.
Position the handle as shown in the illustra
tion above right.
Slide the handle into the opening at the top
of the vacuum cleaner.
Handle
Screw
Hole
Insert the screw so it passes through the
handle into the vacuum cleaner.
Begin to tighten
the screw with
your fingers. It
may be neces
sary to adjust
the handle
slightly.
Using a screwdriver, tighten the screw.
A
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw in place.