Kenmore 3405602 - Manual (Page 39)

Problem
Dryer Will
otRun
con’t)
Possible Cause
Using a regular fuse.
Lint in Load
Dryer door not firmly closed.
PUSH TO START Button
not firmly pressed.____
Controls not set in an
ON position.
Lint scref:n is clogged.
Solution
Replace with a time-delay fuse.
Close dryer door tightly.
Press PUSH TO START Button again.
Reset controls in an ON position.
Clean lint screen. Check for air
movement.
Improper sorting.
Sort lint givers from lint takers
and by color.________ __
Load is t(X) big or heavy.
Dry smaller loads so lint can be
carried to the lint screen. _
Load is overdried.
Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see “OPERATION").___
Paper or tissue in pockets. Clean out pockets before drying^
Siiíjííing mistaken for lint. '
Stains on Load Improper use of fabric softener
in washer.
Use fabric softener sheets in dryer. Add
at beginning of cycle when load is cold.
Drying soiled items.
Items need to be clean before
beino dried.
Items
Shrinking
Overdrying.
Match dryer settings to fabric type
(see “OPERATION”).
Poor garment quality.
Check quality of garment before
purchasing.
Manufacturer’s care label
instructions not followed.
Follow fabric care label instructions
carefully.
Loads are
Wrinkled
Overloading.
Dry smaller loads that can tumble freely. I
Overdiy'ing.
Match dryer settings to fabric type
(see “OPERATION”).
Load left in dryer at the
end of cycle.
Remove load as soon as tumbling
stops. .
Odors
Household chemicals, paint,
or varnish being drawn
into dry er.
Do not use dryer while these chemical
fumes are in the air.
Rrst use of dryer element
(electric only).
Will be gone after the first cycle.
Unusual
Sounds
Whistle - blocked lint screen
causes Lint Alert to activate.
Clean lint screen.
Thumping of rollers when
dryer has set.
Thump will go away after 5 minutes
of drying.
39