Kenmore 9400* - Manual (Page 10)

Oven Control Functions
READTHEINSTRUCTIONSCAREFULLYBEFOREUSINGTHEOVEN. For satisfactoryuse ofyour oven, becomefamiliarwith
the various pad functions of the oven as described below.
CLOCK SET
PAD— Used
to set the
time of day
TIMER ON/OFF
PAD— Used to set
or cancel the minute
timer. The minute
timer does not start
or stop cooking.
Also,
“
TIMER ON/OFF pad
is used to set the
Continuous Bake
feature.
BROIL PAD— Used to
select the variable broil
function.
SELECT SELF-CLEAN
PAD— Used to select the
Self-Cleaning cycle. A 2,
3 or 4 hour Self-Clean
time may be selected.
UP and DOWN ARROW PADS— Used along
with the function pads to select oven
temperature, time of day, clean time and
minute timer.
FEATU REINDICATOR
LIGHTS— These light to
show which feature is in
use.
ÍMlafia
• Q'^Éñ
• Precisai
• ììiKif tcífrked
OVEN, PREHEAT & DOOR LOCKED LIGHTS* —The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self­
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks.
BAKE PAD—Used to
select the bake function.
CLEAR/OFF PAD— Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate Oven Lockout
setting.
i*Note: The OVEN indicator light pn the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is norrrial and indicates that the oven is cycling to maintain the seiected baking ternperature. When the ; . .
preheat indicator light turns OFF, your oven is ready.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77”C to 287”C).
To change the temperature to °C (Celsius) or from “C to °F (control should not be in a Bake or Clean mode);
1. Press . "--------------" appears in the display.
2. Press and hold the W until "FH" appears in the display.
3. Press and hold until °F or °C appears in the display.
4. Press the W or 'V' to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
10