Kenmore 1T6.29429 - Manual (Page 7)

CANISTER
1. open the canister hood.
2. Check to see that the dust bag is proper­
ly installed. See BAG CHANGING for
instructions.
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY
FILTER CLEANING for instructions
HOOD
It is normal for the canister hood to come off
when opened further than needed. Line up
the hinges, insert them, and dose the hood
to replace it.
HOSE
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place.
To remove: lift
hose latch tab
upward and pull
up on hose.
2. insert
handle into
wand until
lock button
snaps in
place. Be
sure hose
is not
twisted.
To remove:
press han-
d ip jrplppcp
button and
pu!l up on
handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
olnrppp ^iAfP hAQP lA p I aapp K/ aa II p H
position so the hose covering is not
stressed.
Cover
Canister
Performance
indicator Light
(Some Modefej
Performance
Indicator
(Some Modeis)
Dust Bag