Kenmore 790-.9663 - Manual (Page 26)

Setting Oven Controls
• Using Air Guard ™
• Setting Bake
Some Important Things to Know Before Setting any Basic Oven Cooking Function:
This appliance has been factory pre-set to start any BAKE, CONV BAKE, CONV ROAST, PREHEAT, CAKE or BREAD
function with the oven set temperature automatically set for 350°F. However if desired, the oven set temperature may be
adjusted at any time during the cooking process. You may also choose to add a COOK TIME or DELAY START with any of
the functions listed above.
Using the Air Guard™ feature
(some models)
Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any active cooking process.
This feature helps remove smoke and eliminates 85% of the odors generated when using your oven.
If you wish to have AirGuard ™ clean the oven exhaust once cooking has started, press
Note: The Air Guard™ indicator light will glow anytime the Air Guard™ is active. Air Guard™ will turn on and cannot be
manually turned off during the Self-cleaning cycle.
Setting Bake
The BAKE pad controls normal baking. If preheating is necessary, refer to the PREHEAT feature for
instructions. The oven can be programmed to bake at any temperature from 170°F to 550°F (The sample shown below is for
350°F).
INSTRUCTIONS PRESS
To set the Bake Temperature to 350°F:
1. Arrange interior oven racks and place food in oven.
2. Press
350°
will automatically appear in the display
(See Fig. 1).
3. Press A long beep will sound once the oven set
temperature reaches 350° F (See Fig. 2).
Note: Pressing will cancel the Bake feature at any time.
To change the Bake Temperature (example changing
from 350° to 425°F):
1. After the oven has already been set to bake at 350°F and the
oven set temperature needs to be changed to 425°F, press
(^Ba^ (See Fig. 2).
2. Press 425“ will appear in the display.
3. Press (See Fig. 3).
4. The oven is now set for425°F.
CDCDCD
DISPLAY
Fig. 1
qn 3cn°
■Du JDU
Fig. 2
:30 H35'0
Fig.3
26