Kenmore 795.7937 - Manual (Page 20)

USING YOUR REFRIGERATOR
CRISPER AND CRISPER COVER
To remove the crisper:
1. Pul! crisper drawer out to drawer stop.
2. Lift the drawer up and toward you to puli out
and remove.
3. To replace crisper, slide back in fully past the
To remove crisper glass:
1. Remove crisper drawers.
2. To remove glass above crispers, reach in under the
glass and lift up.
To remove the crisper cover:
1. Remove both crisper drawers.
2. While holding the center crisper cover support in
place, pul! the cover up and out.
CRISPER HUMIDITY CONTROL
You can control the amount of humidity in the moisture-
sealed crispers. Adjust the control to any setting between
TCJ and .
•’WIets moist air out of the crisper for best storage of
fruits.
keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
To control the humidity in the crisper compartments,
move the slide above each crisper up (more moisture)
or down (less moisture)
SNAP-ON DOOR RACKS
The door racks may be removed for easier cleaning.
Door racks are in both the refrigerator and the freezer.
The door racks are force-fitted with tabs and slots.
Snap-On Door Racks
To remove door racks:
1. Remove all items from the door rack.
2. Push sides of rack together while lifting up.
Rack will lift out.
To replace the racks:
1. Hold door rack ends with both hands tilted slightly
downward and push together slightly while fitting
tabs on rack into slots in door. Force-fit into place.
20