Oven vent location, Removing & replacing oven racks, Arranging oven racks – Kenmore 790.9643 User Manual

Page 7: Types of oven racks, Baking layer cakes with 1 or 2 oven racks, Air circulation in the oven, Before setting oven controls, Shelf

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before Setting Oven Controls

OVEN VENT

Oven Vent Location

The oven vent is located

under the left side of the control panel

(See Fig. 1). When the oven is on, warm air passes through the vent.
This venting is necessary for proper air circulation in the oven and good
baking results. DO NOT BLOCK OVEN VENT.

Removing & Replacing Oven Racks

To remove,

pull the rack forward until it stops. Lift upfront of rackand slide

out.

To replace,

fit the rack onto the guides on the oven walls. Tiitthefront

of the rack upward and slide the rack back into place.

o

©

s

e

o

Arranging Oven Racks

ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL

(PRIOR TO OPERATING THE OVEN). Always use oven mitts when

using the oven.

For models with a visible Bake Element (Refer to Fig. 2)
For models with a hidden Bake Element* (Refer to Fig. 3)

Oven with visible

Bake Element - Fig. ;

Types of Oven Racks

Your range may be equipped with
one or more of the oven rack types
shown;

Flat Rack, Handle Rack

and

Offset Rack.

To maximize

cooking space the Offset rack can be
used in the lowest rack position to
roast large cuts of meat and poultry.

Food

Rack PositionRack Position*

Broiling hamburgers & steaks

See Broil section

See Broil section

Broiling meats, chicken or fish

4, 5 or 6

4, 5. or 6

Cookies, cakes, pies, biscuits

& Muffins

3 o r 4

3 o r 4

Frozen pies, angel food cake,

yeast, bread, casseroles, small

cuts of meat or poultry

1 or2

1

Turkey, roast or ham

1

Roasting Shelf

Ü

h

H

»

Roasting

Shelf

O

O

8

e

o

Oven with hidden

Bake Element - Fig. 3*

Flat

Oven Rack

Handle

Oven Rack

Offset

Oven Rack

Baking Layer Cakes with 1 or 2 Oven Racks

For best results when baking cakes using 2 oven racks, place cookware on rack positions 2 & 5 as shown (for models with a

visible bake element). For modeiswith a hidden bake element place oven racks in positions 3 (Fiat rack) & 6 with the Offset rack
if equipped (Refer to Fig. 4).

For best results when using a single oven rack, place cookware on rack positions 3 or 4 (for all models - Refer to Fig. 5).

Air Circulation in the Oven

For best air circulation and baking
results allow 2-4" (5-10 cm) around

the cookware for properair circulation
and be sure pansand cookware do not
touch each other, the oven door, sides
or back of the oven cavity. The hot air
must be able to circulate around the
pans and cookware in the oven for
even heat to reach around the food.

Fig. 4

Fig. 5

Advertising
This manual is related to the following products: