Benefit, For your – Kenmore Automatic Washers User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REVIEW INSTALLATION
for your
Benefit
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore washer.
□ Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
□ Check that you have:
• All the tools you started with.
• Removed all packaging materials.
• Removed shipping strap with
three cotter pins.
• Installed all parts listed on
pages 6-8.
□ Check that:
• The washer is level.
• The nuts on the front legs are tight.
□ Check that the water faucets are
turned on.
FINAL STEPS
□ Plug power supply cord into
grounded outlet.
□ Remove the blue protective film on
the console and any tape remaining
on washer.
□ Take a few minutes and read the
Operating Instmctions (pages 20-28)
to fully understand your new washer.
Then, start the washer and allow it to
complete the ULTRA CLEAN Cycle.
19