Optional accessory, To install rotisserie, Installing rôtisserie – Kenmore Kitchen Grill User Manual

Page 20: Module accessories (all models), Liil, Roti/shish

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

module accessories (all models)

Optional Accessory

ROTI/SHISH

NO.

49926

The rotl/shish accessories are to be used with the steak

grill (No. 49924).

5.

The spit handle is removable, if necessary, Leave

the handle in place for easier handling on the spit
and meat

6.

Take apart and clean after each use when parts

are cool
Caution; The end supports can become hot

TahQ \

/

o™ X

fiiiiii

Skewers

Motor

Low Position

Front End Support'

TO INSTALL ROTISSERIE

1. Grasp the rear end support with two hands (See

Step 1), The end support with five holes fits Into

the rear grill frame and the end support with
skewer support positions fits into the front

Fit the tabs on the end supports into the opening

in the grill frame. Slide forward Push top of the
rear end supports back until bottom is level on the

grill frame (See Step 2).

The motor fits on the back of the rear end support

irr the low position the motor is mounted vertically.

In the high position the mounting is horizontal.

The spit rests in a slot in the front end support.

Push the end of the spit firmly into the motor

socket at the rear of the cooktop Both the spit
and motor must be placed in the same position,
either high or low (See Step 4).

liil

20

Advertising