Kenmore 665.1389 - Manual (Page 6)

START-UP / QUICK REFERENCE
C ycles
Pots
Pans
Normal , Light
Wash Wash
Fast
Wash
Quick
Rinse
O ptions
Hi
’ Temp
Sani
Rinse
Heated
Dry
4 Hour
Delay
fCANCEL\ /S tarts
\ DRAIN
J
S^RESUME^
IMPORTANT:
Do not block detergent dispenser.
Tall Items placed In the lower
rack may block the dispenser
door. Cookie sheets and
cutting boards loaded on the
left-hand side of the
dishwasher can easily block
the dispenser. If detergent Is
Inside of the dispenser or on
the bottom of the tub after
the cycle Is complete, the
dispenser was blocked.
Drying - Rinse Aid is essential.
You must use rinse aid for
good drying performance
(sample Included). Rinse aid
along with the Heated Dry
option will provide best drying
and avoid excessive moisture
In the dishwasher Interior.
SmartWash® cycle
Optical soil sensors are used In the cycle to
provide optimal energy and water
consumption based on load size and soil
amount. The sensors also automatically
calibrate throughout the life of your
dishwasher to maintain cleaning performance
based on your water conditions.
Press START/RESUME every time
you add a dish.
To start and resume a cycle, press START/
RESUME and close the door within
3 seconds. If the door Is not closed within
3 seconds, the start button LED will flash and
the cycle will not start.
IMPORTANT: If anyone opens the door (such
as, adding a dish, even during the Delay
Hours option), the START/RESUME button
must be pressed again, and the door closed
within 3 seconds to resume the cycle.
Fast Wash - When you need fast results.
When you need fast results, use the Fast
Wash cycle. The 30-minute cycle will allow
dishes to receive a quick wash. Towel drying
may be needed.