Kenmore 665.1389 - Manual (Page 9)

Place cups and glasses In the rows between tines. Placing them over the tines can lead to breakage and water spots. To avoid
damage to your delicate Items, be sure china, crystal, stemware and other similar Items do not touch during dishwasher operation.
Load lightweight and dIshwasher-safe plastic Items only In the top rack.
Loading Recommendations
Fold-down Tines
10 place load 12 place load
The row of tines on the left-hand and right-hand sides of the top
rack can be adjusted to make room for a variety of dishes.
1. To adjust, grasp the tip of the tine that Is In the holder In the
front of the rack.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack.
No-Flip Clips (on some models)
The no-fllp clips hold In place lightweight Items such as cups,
lids, or bowls during washing. The clip can be moved to another
tine by pulling up and off.
Removable Top Rack
The removable top rack allows you to wash larger Items such as pots, roasters, and cookie sheets
In the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from dishwasher.
To remove the top rack
1. Pull the rack forward slightly to access clips.
2. While pressing the ridges In, push back on the clip until the outer side releases. Slide the clip to
the Inside of the track edge to remove the clip.
3. After removing both clips, pull rack out.
To replace the top rack
1. Place the rollers on each side of the rack Into the rack tracks and push the rack back.
2. Align the open side of the clip with the Inside edge of the rack track.
3. Push the ridges and slide the clip toward the outside rack edge until It locks Into place.
4. Repeat on the other side.
5. Pull the rack out all of the way to ensure clips are fully seated.