Kenmore 580. 72089 - Manual (Page 6)

INSTALLATION
Pick a location which will aiiow you to biow the cold
air into the area you want. Windows used for
installation must be strong enough to support the
weight of the air conditioner, Good installation with
special attention to the proper position of the unit
will lessen the chance that service will be needed-
When cooling more than one room, installation
location is very important To cool your rooms, cold
air must be blown from the air conditioner in a
straight path.
HOW TO INSTALL
If the air conditioner is blocked by a storm window frame,
see step t9 on page 8 before beginning to instait
EB Remove the screws which fasten the cabinet at
both sides and at the back. Save side screws.
Discard back screws.
“V
llllift
Slide the unit out of the cabinet by gripping the
base pan handle and pull forward while bracing the
cabinet.
' 3 -'-Ê ■ !
FiG. 4
H Cut the FOAM SEAL (ITEM 1) to fit the
underside of the window sash. Peel off the backing
and attach the FOAM SEAL as shown in Fig, 5.
'-Sash
^ FIG. 5
fej Insert the side curtain (ITEM A) into the upper
guide and lower guide of the air conditioner,, Fasten
the curtains to the unit with screws (ITEM E).
Carefully place the cabinet on the window inner sill
and align the center of the cabinet front with the
center line marked in the window Inner sili.
FIG. 7
l,",l Puli the bottom window sash down behind the
upper guide until they meet
NOTE; Do not pull the window sash down so tightly
that the movement of side curtain is restricted.
Loosely assemble the sill supports using the
parts in FIG, 9.
INDOOR ==^ ^p======ç= OUTDOOR
^ ITEM В
ITEM 0
item ' d
FIG. 9
6 ^